Komatsu PW160-7H Operation & Maintenance Manual page 91

OPERATION
1. WORKING MODE SELECTOR SWITCH (BASIC SWITCH)
This switch (1) is used to set the power and movement of the
work equipment.
Operations can be carried out more easily by selecting the mode
to match the type of operation.
A mode: For heavy-load operations
E mode: For operations with emphasis on fuel economy
L mode: For fine-control operations and lifting
B mode: For breaker operations
When the engine is started, the working mode is set automat-
●
ically to A mode. When the switch is pressed, the system will
scroll through each mode in turn. The display on the monitor
display portion changes for each mode.
If you require a default setting other than 'A mode' please
●
consult your Komatsu distributor or dealership to have the
setting amended.
REMARK
When the mode selector switch is pressed, the mode is dis-
played in the centre of the monitor display, and the screen returns
to the normal screen after 2 seconds. (The diagram on the right is
an example of the display for the A mode.)
When using the breaker, do not use A mode. There is danger
that the breaker may be damaged.
PW160-7H VEAM390100
WARNING
EXPLANATION OF COMPONENTS
Monitor display
portion
Monitor display portion
2 seconds
91