Cap, Cover With Lock - Komatsu PW160-7H Operation & Maintenance Manual

OPERATION

CAP, COVER WITH LOCK

The fuel filler, hydraulic tank filler, operator's cab, engine hood,
tool box cover, right side door and left side door of the machine
body are fitted with locks.
Use the starting switch key to lock or unlock these places.
METHOD OF OPENING AND CLOSING CAP WITH
LOCK (For the fuel tank filler port)
To open the cap
1. Insert the key into the cap.
2. Turn the key clockwise, align the match mark on the cap with
the rotor groove, then remove the cap.
To lock the cap
1. Turn the cap into place.
2. Turn the key and take the key out.
Insert the key as far as it will go. If the key is turned before it is
inserted all the way, it may break.
METHOD OF OPENING AND CLOSING COVER
WITH LOCK (cover with lock)
To open the cover (locked cover)
1. Insert the key.
2. Turn it counterclockwise and open the cover by pulling the
cover grip.
To lock the cover
1. Close the cover and insert the key.
2. Turn the key clockwise and take the key out.
PW160-7H VEAM390100
CONTROL LEVERS, PEDALS
type A
1
3
1
2
A
AL067870A
2
AW34934D
type B
AW34935D
123