CHECK AFTER STOPPING ENGINE
CHECK AFTER STOPPING ENGINE
LOCKING
Always lock the following places.
Door of operator's cab.
(1)
Always remember to close the window.
(2)
Fuel tank filler port
(3)
Engine hood
(4)
Tool boxes within steps
(5)
Right & Left machine cab doors
(6)
Refuel pump locker cover (If applicable)
REMARK
Use the starting switch key to open and close all these
places.
OVERLOAD WARNING DEVICE
Excavators are provided with this device to warn the operator
about tipping over while lifting loads. A buzzer will sound when
the machine is in L mode and the machine nears its lifting capac-
ity.
REMARK
Only conduct lifting operations in L mode as the overload
warning system is only active in this mode.
HANDLING THE WHEELS
Incorrect handling of wheels and tyres can result in serious
injury or death.
Particular care is required when working on twin wheel
assemblies.
Before any attempt is made to remove the road wheels the
tyres must be fully deflated.
1. General information
Always replace damaged parts with new parts from your
●
Komatsu distributor.
Never attempt to repair damaged items.
Use the appropriate tools in a good condition to remove the
●
various pieces of the rim. Never use metallic hammer, use a
mallet with a face made from Rubber, Plastic or Copper.
190
WARNING
2
3
1
4
6
PW160-7H VEAM390100
OPERATION
5