Komatsu PW160-7H Operation & Maintenance Manual page 116

CONTROL LEVERS, PEDALS
STEERING WHEEL
The machine can be steered by turning steering wheel (31) in the
desired direction.
The position of the steering column can be adjusted fore and aft
by depressing pedal (1), moving column to desired position and
releasing pedal (1).
Steering actions will be reversed if undercarriage is facing
opposite direction.
HYDRAULIC ADJUST BOOM PEDAL
Pedal (29) is used to operate the second boom.
(1) Raise
(2) Lower
Neutral position: Boom is stopped and held in the same position.
NOTE: On machines equipped with a monoboom this pedal is
used to operate the second attachment circuit (option).
Do not rest foot on the pedal unless in use.
HCU PEDAL (OPTION)
Pedal (28) is used to operate the attachment.
REMARK
Confirm with attachment manufacturer at time of installation,
correct pedal and attachment operation before use.
116
WARNING
Pedal pushed forward
Pedal pushed back
CAUTION
1
29
Raise
Neutral
Lower
28
PW160-7H VEAM390100
OPERATION