Controller; Tool Box (Chassis); Refuelling Pump - Komatsu PW160-7H Operation & Maintenance Manual

OPERATION

CONTROLLER

A pump and governor controller is provided. It is located under-
neath the seat.
NOTICE
Never splash or spill water, mud or drink over the con-
●
troller as this may cause a fault.
If a fault occurs in the controller, do not attempt repair,
●
but consult your Komatsu distributor.

TOOL BOX (CHASSIS)

This is used for keeping the tools.

REFUELLING PUMP

SAFETY
Do not bring fire or sparks near fuel - smoking is prohibited.
●
In event of ingested fuel - do not induce vomiting. Drink large
●
quantity of milk or water and seek medical attention.
Skin protection - wear protective gloves when dispensing fuel.
●
Plastic gloves conforming to EN388 cat: 2 are recommended.
Attendance - transfer of fuel must always take place under
●
the supervision of the operator.
Location for refuelling: Ensure that refueling takes place away
●
from hazardous areas.
PROCEDURE
1. When the machine is operated on sites with no fuel container
and pump, the machine may be refuelled, using the refuelling
pump, from fuel barrels.
PW160-7H VEAM390100
CONTROL LEVERS, PEDALS
141