EXPLANATION OF COMPONENTS
2. CREEP SPEED SELECTOR SWITCH
This switch (2) is used to set the travel mode to creep.
CR lights up: Creep mode travel (0-1.5kph).
To cancel creep speed, press Hi/Lo switch.
REMARK
When creep speed is selected the mode is displayed in the
centre of the screen for 2 seconds before returning to the normal
screen display.
When loading or unloading from a trailer, always travel at low
●
speed. Never operate the travel speed selector switch during
the loading or unloading operation.
92
OPERATION
Display portion
PW160-7H VEAM390100