MAINTENANCE
EVERY 250 HOURS MAINTENANCE
CHECK OIL LEVEL IN MACHINERY CASE, ADD OIL
The parts and oil are at high temperature after the engine is
stopped, and may cause serious burns. Wait for the tempera-
ture to go down before starting the operation.
1. Remove dipstick (G) and wipe the oil from the dipstick with a
cloth.
2. Insert dipstick (G) fully in the guide.
3. When dipstick (G) is pulled out, if the oil level is between the
H and L marks of the gauge, oil level is correct.
4. If the oil does not reach the L mark on dipstick (G), remove oil
filler (F), and add engine oil.
5. If the oil level exceeds the H mark on the dipstick, loosen
drain plug (P) to drain the excess oil.
6. After checking oil level or adding oil, insert the dipstick into
the hole and install oil filler cap.
PW160-7H VEAM390100
WARNING
SERVICE PROCEDURE
G
P
F
279