Moving Machine Off - Komatsu PW160-7H Operation & Maintenance Manual

OPERATION

MOVING MACHINE OFF

MOVING MACHINE FORWARD
When moving off, check that the area around the
●
machine is safe, and sound the horn before moving.
Clear all personnel from the machine and the area.
●
Clear all obstacles from the path of the machine.
●
If installed, ensure outriggers & dozer blade are up.
●
If the lever is moved inside auto decel speed, engine
●
speed will rise suddenly. Operate the levers carefully.
Note the direction of undercarriage before moving off.
●
Check that low brake pressure warning lamp is off
●
Check service brake just after moving off.
●
Always fasten seat belt
●
1. Set swing lock switch to the ON (actuated) position and con-
firm that swing lock monitor lamp lights up.
2. Turn fuel control dial to the min. idling position, engine speed
is controlled automatically.
3. Lower the safety lock lever to the UNLOCK position, fold the
work equipment, and raise it 40 - 50 cm from the ground.
PW160-7H VEAM390100
WARNING
OPERATIONS AND CHECKS BEFORE STARTING ENGINE
MIN
LOCK
8
9
10
11
12
13
OFF
ON
UNLOCK
167