Komatsu PW160-7H Operation & Maintenance Manual page 96

EXPLANATION OF COMPONENTS
If it is desired to change the setting for the maintenance interval,
please contact your Komatsu distributor.
q The method of checking the time remaining to maintenance is
as follows.
1. Look at the maintenance screen, press up switch (14) or
down switch (13) on the monitor switch portion, until required
item is highlighted.
(The colour of the monitor for the selected item is inverted to
black.)
REMARK
It is possible to enter the number of the item from the keypad
(i.e. Enter 12 for transmission oil)
2. After highlighting the monitor item, press input confirmation
switch (12). The display screen will switch to the time remain-
ing to maintenance.
(Press back switch (15) to return to the previous screen.)
3. Check the time remaining to maintenance.
(a): Time remaining to maintenance
(b): Default setting for maintenance interval
When only checking the time remaining to maintenance,
press back switch (15) twice.
The screen will return to the normal operation monitor screen.
When cancelling the time remaining to maintenance and
returning to the default time setting, press input confirmation
switch (12). The screen will switch to the default setting
screen.
4. After checking the time on the default setting screen, press
input confirmation switch (12).
The screen will return to the maintenance screen.
(Press back switch (15) to return to the previous screen.)
96
A
B
PW160-7H VEAM390100
OPERATION
15
14
13
12