Komatsu PC200-8 Brochure

STANDARD EQUIPMENT

● Alternator, 35 Ampere, 24 V ● Engine, Komatsu SAA6D107E-1
● Anti-slip plates ● Engine overheat prevention system
● Auto-decel ● Fan guard structure
● Automatic engine warm-up system ● Hydraulic track adjusters (each side)
● Batteries, 110 Ah/2 x 12 V ● Multi-function color monitor
● Boom holding valve ● Power maximizing system
● Cab, OPG top guard level 2 capable with ● PPC hydraulic control system
● Radiator and oil cooler dust proof net
optional bolt-on top guard
● Counterweight ● Rear reflector
● Dry type air cleaner, double element ● Rearview mirrors (RH, LH, rear, sidewise)
● Electric horn ● Starting motor, 4.5 kW/24 V x 1
● EMMS monitoring system ● Suction fan

OPTIONAL EQUIPMENT

● Additional filter system for poor-quality fuel ● Cab accessories
● Air conditioner with defroster
—Rain visor
● Alternator, 60 Ampere, 24 V
—Sun visor
● Arms ● Cab front guard
—2925 mm 9'7" arm assembly —Full height guard
—2410 mm 7'11" arm assembly —Half height guard
● Heater with defroster
—1840 mm 6'0" arm assembly
● Batteries, large capacity ● Long lubricating intervals for work equip-
● Bolt-on top guard, [Operator Protective
ment bushing (500 hours)
● Rear view monitoring system
Guards level 2]
● Boom, 5700 mm 18'8" ● Seat belt, retractable
● Seat, suspension

SPECIAL PURPOSE BUCKET

• Ditch cleaning bucket • Slope finishing bucket for scraping
—Capacity slopes of banks
SAE heaped 0.80 m 3 1.05 yd 3 —Capacity
CECE heaped 0.70 m 3 0.92 yd 3 SAE heaped 0.40 m
Width 1800 mm 70.9" CECE heaped 0.35 m
• Trapezoidal bucket is ideal for digging Width 2000 mm 78.7"
ditches and for drainage works
—Capacity
SAE heaped 0.7 m 3 0.92 yd 3
CECE heaped 0.5 m 0.65 yd
3 3
www.Komatsu.com
CEN00049-06
● Track guiding guard, center section
● Track roller
—PC200-8, 7 each side
—PC200LC-8, 9 each side
● Track shoe
—PC200-8, 600 mm 24" triple grouser
—PC200LC-8, 700 mm 28" triple grouser
● Travel alarm
● Working light, 2 (boom and RH)
● Working mode selection system
● Service valve
● Shoes, triple grouser
—PC200-8: 500 mm 20",
700 mm 28", 800 mm 31.5"
—PC200LC-8: 600 mm 24",
800 mm 31.5", 900 mm 35.5"
● Track frame undercover
● Track roller guards (full length)
● Working lights
—2 on cab
—1 on counterweight
• Ripper bucket for hard and rock ground
—Capacity
SAE heaped 0.62 m 3 0.81 yd
3 0.52 yd 3 CECE heaped 0.56 m 3 0.73 yd
3 0.46 yd 3 Width 990 mm 39.0"
• Single-shank ripper and three-shank
ripper are recommended for rock-digging
and crushing, hard soil digging, pave-
ment removal works, etc.
Printed in Japan 200905 IP.As(10)
Materials and specifications are subject to change without notice.
is a trademark of Komatsu Ltd. Japan.
PC200
PC200LC
3
3
-8
-8
Photo may include optional equipment.
FLYWHEEL HORSEPOWER
Gross: 116 kW 155 HP @ 2000 rpm
Net: 110 kW 148 HP @ 2000 rpm
Operating Weight
PC200-8: 19400– 20010 kg
42,770– 44,110 lb
PC200LC-8: 20630– 21460 kg
45,480– 47,310 lb
PC
200