Komatsu PW160-7H Operation & Maintenance Manual page 163

OPERATION
5. After carrying out the warming-up operation, check that each
gauge and monitor lamp is in the following condition.
Engine water temperature gauge (1): Inside black range
●
Fuel gauge (2): Inside green range
●
● Engine water temperature monitor (3): green
Radiator water level monitor (4): off
●
Engine oil pressure monitor (5): off
●
Charge level monitor (6): off
●
Fuel level monitor (7): green
●
Air cleaner clogging monitor (8): off
●
Engine pre-heating lamp (9): green
●
● Engine oil level monitor (10): off
Hydraulic oil temperature (11): green
●
Hydraulic oil temperature gauge (12):inside black range
●
Replacement monitor of engine oil: off (13)
●
6. Check that there is no abnormal exhaust gas colour, noise, or
vibration. If any abnormality is found, repair it.
7. Press power mode select on the monitor panel until the lamp
of the mode to be used lights up.
PW160-7H VEAM390100
OPERATIONS AND CHECKS BEFORE STARTING ENGINE
4
1
3
12
10
8
13
2
7
5
9
11
6
163