Komatsu PW160-7H Operation & Maintenance Manual page 321

OPTIONS, ATTACHMENTS
WHEN USING CRUSHER OR OTHER GEN-
ERAL ATTACHMENT
When the A mode or E mode control switch is ON if the buttons
(2) and (3) are pressed, the attachment is actuated.
1. Set the working mode to A mode or E mode.
2. When menu select switch (5) on the monitor is pressed, the
screen changes to screen (C), so press up switch (14) or
down switch (13) to move the bar graph showing the oil flow
up or down, then press input confirmation switch (12).
The default setting is the full flow
●
Even if the starting switch is turned OFF, the set oil flow when
●
the engine is next started will be the value set by the above
procedure.
Precautions when using
Check that the stop valve is at the FREE position.
●
Check that the selector valve is in the position for general
●
attachments such as crusher, check that working mode is A
mode or E mode.
For other precautions when handling the attachment, follow
●
the instruction manual from the attachment manufacturer and
use the attachment correctly.
PW160-7H VEAM390100
(approx. 320 litres/min).
MACHINES READY FOR ATTACHMENTS
0.
2
3
15
14
13
12
321