Call Progress Tones
Frequency 2 = 440 Hz at –19 dBm
Number of Cadence Sections = 1
Cadence Section 1: Section Length = 10 s
Number of Segments = 1
Segment 1: On=forever, with Frequencies 1 and 2
Total Tone Length = 10s
Example 2—Stutter tone: 350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2)
Number of Frequencies = 2
Frequency 1 = 350 Hz at –19 dBm
Frequency 2 = 440 Hz at –19 dBm
Number of Cadence Sections = 2
Cadence Section 1: Section Length = 2s
Number of Segments = 1
Segment 1: On=0.1s, Off=0.1s with Frequencies 1 and 2
Cadence Section 2: Section Length = 10s
Number of Segments = 1
Segment 1: On=forever, with Frequencies 1 and 2
Total Tone Length = 12s
Call Progress Tones
Table 37: Call Progress Settings
Field
Dial Tone
Second Dial Tone
Outside Dial Tone
Prompt Tone
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
56
Description
Prompts you to enter a phone number. Reorder Tone is played
automatically when Dial Tone or any of its alternatives times out.
Default setting: 350@-19,440@-19;10(*/0/1+2)
Alternative to the Dial Tone when you dial a three-way call.
Default setting: 420@-19,520@-19;10(*/0/1+2)
Alternative to the Dial Tone. It prompts you to enter an external phone
number, as opposed to an internal extension. A comma character in the
dial plan triggers it.
Default setting: 420@-16;10(*/0/1)
Prompts you to enter a call forwarding phone number.
Default setting: 520@-19,620@-19;10(*/0/1+2)
Voice Settings Configuration