Snmp - Cisco ATA 191 Administration Manual

Analog telephone adapter guide for multiplatform firmware
Hide thumbs Also See for ATA 191:
Table of Contents

Advertisement

Administration Settings

SNMP

Use the Administration > Management > SNMP page to set up Simple Network Management Protocol
(SNMP) for the ATA.
SNMP is a network protocol that allows network administrators to manage, monitor, and receive notifications
of critical events as they occur on the network. The ATA supports SNMPv2 and SNMPv3.
It acts as an SNMP agent that replies to SNMP commands from SNMP Network Management Systems. It
supports the standard SNMP get, next, and set commands. It also generates SNMP traps to notify the SNMP
manager when configured alarm conditions occur. Examples include reboots, power cycles, and INTERNET
(WAN) events.
Enter the settings as described below. After making changes, click Submit to save your settings, or click
Cancel to redisplay the page with the saved settings.
SNMP Settings
Table 69: SNMP Parameters
Field
Enabled, Disabled
Trusted IPv4
Trusted IPv6
Get/Trap Community
Set Community
SNMPv3 Settings
Table 70: SNMPv3 Parameters
Field
Enabled, Disabled
Description
Click Enabled to enable this feature, or click Disabled to disable it.
The default setting is Disabled.
Choose Any to allow access from any IPv4 address (not recommended).
Click Address to specify the IPv4 address and subnet mask of a single
SNMP manager or trap agent that can access the ATA through SNMP.
Choose Any to allow access from any IPv6 address (not recommended).
Click Address to specify the IPv6 address and prefix length of a single
SNMP manager or trap agent that can access the ATA through SNMP.
Enter a community string for authentication for SNMP GET commands.
The default value is public.
Enter a community string for authentication for SNMP SET commands.
The default value is private.
Description
Click Enabled to enable this feature, or click Disabled to disable it.
The default setting is Disabled.
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
SNMP
99

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ata 192

Table of Contents