Time Settings - Cisco ATA 191 Administration Manual

Analog telephone adapter guide for multiplatform firmware
Hide thumbs Also See for ATA 191:
Table of Contents

Advertisement

Time Settings

Field
LAN IPv6 Address
Time Settings
Use the Network Setup > Basic Setup > Time Settings page to set the system time for the ATA. By default,
the system time is set automatically by using a Network Time Protocol (NTP) server. You can configure the
system time manually. In addition, you can use this page to specify your time zone, enable Daylight Saving
adjustments, and modify related settings.
After making changes, click Submit to save your settings, or click Cancel to redisplay the page with the
saved settings.
User Manual
If you prefer to set the system manually, click User Manual and then enter the date and time.
Table 10: Time Settings
Field
Date
Time
Time Zone
To use a time server to establish the time settings, select Time Zone. Then complete the fields in this section.
Table 11: Time Zone Settings
Field
Time Zone.
Adjust Clock for Daylight Saving Changes.
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
24
Description
Display the LAN IPv6 address information.
Description
Enter the date in the following order: four-digit year,
month, day.
Enter the time in the following order: hour (from 1
to 24), minutes, and seconds.
Description
Choose the time zone for the site where the ATA is
in operation. Default setting: (GMT-08:00) Pacific
Time (USA & Canada).
Check the box if you want to automatically adjust the
time when Daylight Savings Time is in effect.
Otherwise, uncheck the box.
Network Configuration

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ata 192

Table of Contents