Vlan - Cisco ATA 191 Administration Manual

Analog telephone adapter guide for multiplatform firmware
Hide thumbs Also See for ATA 191:
Table of Contents

Advertisement

Network Configuration
By default, VPN Passthrough is enabled for IPsec, PPTP, and L2TP.
After making changes, click Submit to save your settings, or click Cancel to redisplay the page with the saved
settings.
Table 14: VPN Passthrough Settings
Field
IPsec Passthrough
PPTP Passthrough
L2TP Passthrough

VLAN

Use the Network Setup > Advanced Settings > VLAN page to assign a VLAN ID to your network. For
example, your call control system may require a particular voice VLAN ID.
After making changes, click Submit to save your settings, or click Cancel to redisplay the page with the saved
settings.
Table 15: VLAN Settings
Field
Enable VLAN.
VLAN ID
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
Description
Internet Protocol Security (IPsec) is a suite of
protocols used to implement secure exchange of
packets at the IP layer. Click Enabled to enable this
feature, or click Disabled to disable it.
Default setting: Enabled
Point-to-Point Tunneling Protocol (PPTP) allows the
Point-to-Point Protocol (PPP) to be tunneled through
an IP network. To disable PPTP Passthrough, select
Disabled.
Default setting: Enabled
Layer 2 Tunneling Protocol is the method used to
enable Point-to-Point sessions using the Internet on
the Layer 2 level. Click Enabled to enable this
feature, or click Disabled to disable it.
Default setting: Enabled
Description
Click Enabled to enable a VLAN, or click Disabled
to disable this feature.
Default setting: Disabled
The VLAN ID can be any numeral from 1 to 4094.
When VLAN is enabled, the default setting is 1.
VLAN
27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ata 192

Table of Contents