Cisco Ata 191 And Ata 192 Analog Telephone Adapter Administration Guide For Multiplatform Firmware - Cisco ATA 191 Administration Manual

Voice Settings Configuration
Field
Hold Reminder Ring
Call Back Ring
Cfwd Ring Splash Len
Cblk Ring Splash Len
VMWI Ring Policy
VMWI Ring Splash Len
Ring On No New VM
Description
Ring pattern for reminder of a holding call when the phone is on-hook.
Default setting: 8
Ring pattern for call back notification.
Default setting: 7
Duration of ring splash when a call is forwarded (0 – 10.0s)
Default setting: 0
Duration of ring splash when a call is blocked (0 – 10.0s)
Default setting: 0
The parameter controls when a ring splash is played when a the VM
server sends a SIP NOTIFY message to the ATA indicating the status
of the subscriber's mail box. Three settings are available.
Default setting: New VM Available
Duration of ring splash when new messages arrive before the VMWI
signal is applied (0 – 10.0s)
Default setting: 0
If enabled, the ATA plays a ring splash when the voicemail server sends
SIP NOTIFY message to the ATA indicating that there are no more
unread voice mails. Some equipment requires a short ring to precede
the FSK signal to turn off VMWI lamp.
Default setting: no

Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware

• New VM Available—Ring as long as there new voicemail
messages.
• New VM Becomes Available—Ring at the point when the first
new voicemail message is received.
• New VM Arrives—Ring when the number of new voicemail
messages increases.
Ring Settings
93