Cisco ATA 191 Administration Manual page 120

DHCP Server Information (ATA 192 Only)
Field
IP Address
MAC Address
Expires Time
Interface
IPv4 DHCP Server Details
Field
DHCP Server
IP Address / Mask
DNS Proxy
Maximum DHCP Users
IP Address Range
Client Lease Time
Static DNS
Option 66
TFTP Server
Option 67
Option 159
Option 160
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
112
Description
The IP address leased to the client.
The MAC address of the DHCPv6 client.
The remaining time in the current DHCP lease, shown in HH:MM:SS
(hours:minutes:seconds) format. The page is periodically updated with
the new value as the timer counts down.
The interface through which the client is connected.
Description
The status of the DHCP server: Enabled or Disabled.
The IP address and subnet mask for the ETHERNET (LAN) interface.
The setting for the DNS proxy service: Enabled or Disabled.
The maximum number of clients that can lease an IP address from the
DHCP server.
The range of IP addresses that can be dynamically assigned by the
DHCP server.
The maximum amount of time, in minutes, that a client can lease a
dynamically assigned IP address.
The IP addresses of up to three DNS servers to be used by DHCP clients.
The setting for Option 66, which provides provisioning server address
information to hosts requesting this option. The ATA may be set to
None (internal), Remote TFTP Server, or Manual TFTP Server.
The IP address, hostname, or URL of the TFTP server used for
provisioning.
The configuration/bootstrap filename that is provided to hosts that
request this option.
The configuration URL that is provided to clients that request this option.
The configuration URL that is provided to clients that request this option.
Status and Statistics