Port Forwarding (Ata 192 Only); Manually Add Port Forwarding (Ata 192 Only) - Cisco ATA 191 Administration Manual

Analog telephone adapter guide for multiplatform firmware
Hide thumbs Also See for ATA 191:
Table of Contents

Advertisement

Network Configuration

Port Forwarding (ATA 192 Only)

Use the Network Setup > Application > Port Forwarding page if you require access to specific ports from
external devices.
List of Port Forwarding
To add a port forwarding rule, click Add Entry. To edit a port forwarding rule, select it in the list and then
click the pencil icon. To remove a port forwarding rule, click the delete icon.
Table 17: Port Forwarding Settings
Field
Number
Type
Status
Application
Port Forwarding Details
To display the details, click an entry in the List of Port Forwarding.
Table 18: Port Settings
Field
External Port
Internal Port
Protocol
IP Address

Manually Add Port Forwarding (ATA 192 Only)

Use this page to enter the port forwarding settings for an application.
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
Port Forwarding (ATA 192 Only)
Description
An identification number for the port forwarding rule.
The type of rule: Single Port Forwarding or Port
Range Forwarding.
The status of the rule: Enabled or Disabled.
The application that uses this rule to access a network
resource.
Description
The port that external clients use to set up this
connection.
The port that the ATA uses when forwarding traffic
to the internal server.
The protocol that is used: TCP or UDP.
The IP address of the internal server accessed by this
rule.
29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ata 192

Table of Contents