Rtp Parameters - Cisco ATA 191 Administration Manual

Voice Settings Configuration

RTP Parameters

Table 30: RTP Parameters
Field
RTP Port Min
RTP Port Max
RTP Packet Size
RTP Tx Packet Size Follows Remote SDP
Max RTP ICMP Err
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
Description
Minimum port number for RTP transmission and
reception.
The RTP Port Min and RTP Port Max parameters
should define a range that contains at least 4 even
number ports, such as 100 to 106.
Default setting: 16384.
Maximum port number for RTP transmission and
reception.
Default setting: 16482.
Packet size in seconds, which can range from 0.01 to
0.16. Valid values must be a multiple of 0.01 seconds.
Default setting: 0.030
Enable the Remote pair RTP Packet Size.
Default setting: Yes
Number of successive ICMP errors allowed when
transmitting RTP packets to the peer before the ATA
terminates the call. If value is set to 0, the ATA
ignores the limit on ICMP errors.
Default setting: 0
RTP Parameters
43