Speed Dial Settings - Cisco ATA 191 Administration Manual

Analog telephone adapter guide for multiplatform firmware
Hide thumbs Also See for ATA 191:
Table of Contents

Advertisement

Speed Dial Settings

Field
Cfwd Last Caller
Cfwd Last Dest
Block Last Caller
Accept Last Caller
Speed Dial Settings
Table 61: Speed Dial Settings
Field
Speed Dial 2-9
Supplementary Service Settings
Table 62: Supplementary Service Settings
Field
CW Setting
Block CID
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
90
Description
The number of the last caller; this caller is actively forwarded to the
Cfwd Last Dest via the Call Forward Last service. For more information,
see
Vertical Service Activation Codes, on page
Default setting: blank
The destination for the Cfwd Last Caller.
The number of the last caller; this caller is blocked via the Block Last
Caller Service. For more information, see
Codes, on page
63.
Default setting: blank
The number of the last caller; this caller is accepted via the Accept Last
Caller Service. For more information, see
Codes, on page
63.
Default setting: blank
Description
Target phone number (or URL) assigned to speed dial 2, 3, 4, 5, 6, 7,
8, or 9.
Default setting: blank
Description
Call Waiting on/off for all calls.
Default setting: yes
Setting Block Caller ID on/off for all calls.
Default setting: no
Voice Settings Configuration
63.
Vertical Service Activation
Vertical Service Activation

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ata 192

Table of Contents