Response Status Code Handling - Cisco ATA 191 Administration Manual

Analog telephone adapter guide for multiplatform firmware
Hide thumbs Also See for ATA 191:
Table of Contents

Advertisement

Response Status Code Handling

Field
Reg Retry Intvl Cap
Response Status Code Handling
Table 29: Response Status Code Settings
Field
SIT1 RSC
SIT2 RSC
SIT3 RSC
SIT4 RSC
Try Backup RSC
Retry Reg RSC
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
42
Voice Settings Configuration
Description
The maximum value to cap the exponential back-off
retry delay (which starts at Register Retry Intvl and
doubles on every REGISTER retry after a failure).
The retry interval is always at Register Retry Intvl
seconds after a failure. If this feature is enabled, Reg
Retry Random Delay is added on top of the
exponential back-off adjusted delay value.
Default setting: 0, which disables the exponential
backoff feature.
Description
SIP response status code for the appropriate Special
Information Tone (SIT). Reorder or Busy tone is
played by default for all unsuccessful response status
code for SIT 1 RSC through SIT 4 RSC.
Default setting: blank
SIP response status code to INVITE on which to play
the SIT2 Tone.
Default setting: blank
SIP response status code to INVITE on which to play
the SIT3 Tone.
Default setting: blank
SIP response status code to INVITE on which to play
the SIT4 Tone.
Default setting: blank
SIP response code that retries a backup server for the
current request.
Default setting: blank
Interval to wait before the ATA retries registration
after failing during the last registration.
Default setting: blank

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ata 192

Table of Contents