Administration Settings
CSS Dump
Use the Administration > Log > CSS Dump page to set and download CSS dump file.
Table 78: CSS Dump Settings
Field
CSS Memory Dump
CSS Memory Dump File
Refresh
Factory Defaults
Use the Administration > Factory DefaultsATA web page to reset the ATA to the default configuration.
Alternatively, press and hold the RESET button for 20 seconds. All user-changeable non-default settings will
be lost. This may include network and service provider data.
You can perform the following tasks:
• Restore Router Factory Defaults: Choose Yes to remove any custom data (router) settings that you have
• Restore Voice Factory Defaults: Choose Yes to remove any custom settings that you configured on the
Firmware Upgrade
Use the Administration > Firmware Upgrade page to upgrade the firmware on the ATA. It is not necessary
to upgrade unless you are experiencing problems with the ATA or if the new firmware has a feature that you
want to use.
Upgrading the firmware may take several minutes. Until the process is complete, DO NOT turn off the
Caution
power, press the hardware reset button, or click the Back button in your current browser.
Before You Begin
Before upgrading the firmware, download the firmware upgrade file for the ATA.
configured. The default settings will be restored when you click Submit.
Voice pages of the ATA web page. The default settings will be restored when you click Submit.
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
Description
Set the CSS Memory dump function to Enabled or
Disabled.
Default value: Disabled
Show the CSS memory dump file store on ATA. Click
the file name to download it.
Click Refresh to refresh the CSS Memory Dump
File.
CSS Dump
105