Ivr Actions - Cisco ATA 191 Administration Manual

IVR Actions

• After entering a value, such as an IP address, press the # (pound) key to indicate that you have finished
• While entering a value, you can cancel the changes by pressing the * (star) key twice within half a
• If the menu is inactive for more than one minute, the IVR times out. You will need to re-enter the IVR
• To enter the decimal points in an IP address, press the * (star) key.
IVR Actions
Table 86: IVR Settings
IVR Action
Enter IVR Menu
Check Internet Addressing Method
Check Internet6 Addressing Method
Set Internet Addressing Method
Check Stack Mode
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
120
your selection. Then proceed as needed:
◦ To save a setting, press 1.
◦ To review a setting, press 2.
◦ To re-enter a setting, press 3.
◦ To cancel your entry and return to the main menu, press * (star).
second. Be sure to press the key quickly, or the * will be treated as a decimal point entry.
menu by pressing the star key four times: ****. Your settings take effect after you hang up the telephone
or exit the IVR. The ATA may reboot at this time.
For example, to enter the IP address 191.168.1.105, perform the following tasks:
◦ Press these keys: 191*168*1*105
◦ Press the # (pound) key to indicate that you have finished entering the IP address.
◦ Press 1 to save the IP address or press the * (star) key to cancel your entry and return to the main
menu.
Menu Option Choices and Instructions
****
100
600
101 0—DHCP
1—Static IP
2—PPoE
102
0—IPv4
1—IPv6
2—Dual
IVR for Administration