Ata 190 Country-Specific Tones And Cadences; Mechanism; Link Tone File With Device; Notes For Tone Configuration - Cisco ATA 190 Administration Manual

ATA 190 Country-Specific Tones and Cadences

Mechanism

The administrator can upload an XML file named g3-tones.xml that describes the tones and cadences to
the directory on the Cisco Unified Communications Manager TFTP server. The directory name is
actually a locale name, such as Australia.
During provisioning, device knows the network locale setting and tries to download [locale
name]/g3-tones.xml from the Cisco Unified CM TFTP server. For example, if network locale is set to
Australia, the path is Australia/g3-tones.xml.

Link Tone File With Device

There are two methods to achieve this purpose:
1.
2.
For method 2, network locale from Device > Phone is not configurable currently because there are only
Note
two choices: none and United States. There is a known issue for Cisco Unified Communications
Manager that countries other than the United States cannot be selected from this menu. Method 2 has a
higher priority than method 1.

Notes for Tone Configuration

•
•
OL-31821-02
In Cisco Unified Communications Manager, navigate to System > Device Pool, and set the Network
Locale value to specify locale option.
In Cisco Unified Communications Manager, navigate to Device > Phone. On the device window, set
the value of Network Locale, which overwrites the value that is set in method 1.
Only ATA 190 Line1 network locale setting is applied. This means that the line2 network locale
always applies the line1 option, even if the value of line2 network locale configured on the Cisco
Unified Communications Manager web page differs from the line1 value.
Only these tones can be configured:
Ringback tone
–
Reorder tone
–
Dialing tone
–
Cisco ATA 190 Analog Telephone Adapter Administration Guide for SIP (Version 1.1)
A P P E N D I X
C
C-1