Progress Tones - Cisco Linksys RT31P2 Administration Manual

CWT8 Cadence
Ring Waveform
Ring Frequency
Ring Voltage
CWT Frequency
4.9.2.

Progress Tones

Most of the 18 progress tones in the PHONE ADAPTER are played automatically in response to fixed
stimuli. However, the administrator can select which SIP response codes correspond to the 4 SIT
tones.
Response Status Code Handling
1
SIT1 RSC
1
SIT2 RSC
1
SIT3 RSC
1
SIT4 RSC
The Frequencies of the actual progress tones are configurable to accommodate local and regional
conventions.
Parameter Name
1
Dial Tone
Second Dial Tone
1
Outside Dial Tone
1
Prompt Tone
Busy Tone
1,2
Reorder Tone
Off Hook Warning
2
Tone
Ring Back Tone
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
Cadence script for distinctive CWT 8
Waveform for the ringing signal
Frequency of the ringing signal. Valid values
are 10 – 100 (Hz)
Ringing voltage. 60-90 (V)
Frequency script of the call waiting tone. All
distinctive CWT is based on this tone.
SIP response status code to INVITE on which
to play the SIT1 Tone
SIP response status code to INVITE on which
to play the SIT2 Tone
SIP response status code to INVITE on which
to play the SIT3 Tone
SIP response status code to INVITE on which
to play the SIT4 Tone
Description
Played when prompting the user to enter a
phone number
An alternative to <Dial Tone> when user
tries to dial a 3-way call
An alternative to <Dial Tone> usually used
to prompt the user to enter an external
phone number (versus an internal
extension). This is triggered by a ","
character encountered in the dial plan.
Played when prompting the user to enter a
call forward phone number
Played when a 486 RSC is received for an
outbound call
Played when an outbound call has failed
or after the far end hangs up during an
established call
Played when the subscriber does not
place the handset on the cradle properly
Played for an outbound call when the far
end is ringing
CadScript 2.3(..3/2)
{Sinusoid, Sinusoid
Trapezoid}
Uns8 25
Uns8 70
FreqScript 440@-10
RscTmplt
RscTmplt
RscTmplt
RscTmplt
Type Default
ToneScript 350@-19,440@-
19;10(*/0/1+2)
ToneScript 420@-19,520@-
19;10(*/0/1+2)
ToneScript 420@-16;10(*/0/1)
ToneScript 520@-19,620@-
19;10(*/0/1+2)
ToneScript 480@-19,620@-
19;10(.5/.5/1+2)
ToneScript 480@-19,620@-
19;10(.25/.25/1+2)
ToneScript 480@-
10,620@0;10(.125/
.125/1+2)
ToneScript 440@-19,480@-
19;*(2/4/1+2)
69