Supported Ata Call Features - Cisco ATA 192 User Manual

Supported ATA Call Features

Table 3: Configuration Utility Features
Feature
Call forward and Selective call forward.
Speed dial.
Supplementary services.
Distinctive ring
Ring setting
Supported ATA Call Features
Depending on your system configuration, your ATA supports some or all the following call features:
• Transfer (attended or supervised)—In this type of transfer, you talk to the receiving party before you
• Transfer (unattended or unsupervised)—In this type of transfer, you complete the transfer and hang up
Cisco ATA 191 and ATA 192 Analog Telephone Adapter User Guide for Multiplatform Firmware
8
complete the transfer.
before the receiving party answers.
Description
You specify the number that will receive calls when
call forward is enabled on the phone. Use the
Configuration Utility page to set up more complicated
call forward functions, for example, when your line
is busy.
For more information, see Call Forward Settings
Selective Call Forward Settings
Features with Phone Adapter Configuration
You assign phone numbers to a line so that you can
quickly call that person.
For more information, see Speed Dial Settings
Set Up Phone Features with Phone Adapter
Configuration Utility
Configure such features as Call waiting, Do not
disturb, or Called ID.
For more information, see Supplementary Service
Settings and Set Up Phone Features with Phone
Adapter Configuration Utility
You can assign a specific ring to a phone number or
line.
For more information, see Distinctive Ring Settings
and Set Up Phone Features with Phone Adapter
Configuration Utility.
You can assign a specific ring to a certain situation
such as when a call is on hold or during a call back.
For more information, see Ring Settings
Phone Features with Phone Adapter Configuration
Utility.
Your ATA
or
and Set Up Phone
Utility.
and
and Set Up