Cisco ATA 191 Administration Manual page 129

IVR for Administration
IVR Action
Set Stack Mode
Set Internet6 Addressing Method
Check IPv6 Auto Configuration
Set IPv6 Auto Configuration
Check Internet IP Address (INTERNET
port)
Check Internet6 Address (INTERNET
port)
Set Static IP Address (INTERNET port)
Set Static IPv6 Address (INTERNET
port)
Check Network Mask
Check IPv6 Prefix length
Set Network Mask
Set Static IPv6 Prefix length
Check Gateway IP Address
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
Menu Option Choices and Instructions
103
0—IPv4
1—IPv6
2—Dual
601
0—DHCP
1—Static IP
2—PPPoE
607
0—Disable
1—Enable
606
0—Disable
1—Enable
110
610
111 Enter the IP address by using numbers
on the telephone key pad. Use the *
(star) key to a decimal point.
Note
611 Available only in static IPv6 mode
120
620
121 To enter the value, press numbers on
the telephone key pad. Press the * (star)
key to enter a decimal point.
Note
621 Available only in static IPv6 mode
130
IVR Actions
This option is available only
after you choose Static IP as
the Internet Connection Type,
through option 101.
This option is available only
after you choose Static IP as
the Internet Connection Type,
through option 101.
121