Management - Cisco ATA 191 Administration Manual

Analog telephone adapter guide for multiplatform firmware
Hide thumbs Also See for ATA 191:
Table of Contents

Advertisement

Administration Settings

Management

Use the Management pages to manage web access to the ATA web page and to enable protocols for remote
configuration and network management.
Web Access Management
Use the Administration > Management > Web Access Management page to configure the settings for
access to the administration of the ATA.
Cisco ATA 192 Web Access Management Fields
Access to the Cisco ATA 192 web page is enabled by default. Admin Access allows you to manage the
configuration from a computer in your office network, and web access allows you to connect from a computer
on a different subnet or on the Internet.
To access the ATA web page, launch a web browser and enter the URL in the Address bar. The URL must
include the specified protocol, the WAN IP address of the ATA, and the specified port number. For example,
with the HTTPS protocol, a WAN IP address of 203.0.113.50, and port 80, you would enter:
https://203.0.113.50:80
Management, page 95
Log, page 102
Factory Defaults, page 105
Firmware Upgrade , page 105
Configuration Management, page 106
Reboot, page 106
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
5
C H A P T E R
95

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ata 192

Table of Contents