Pan/Aux Send 1-8 Knob Strip; Project Information - Roland VS-2480 Owner's Manual Addendum

4—VGA Main Display Universal Elements

23. Project Information

This readout shows the name of the current project, its sample rate and
its recording mode.

PAN/AUX SEND 1-8 Knob Strip

FADER paddle
In this illustration, the knobs in the PAN/AUX SEND 1-8 knob strip are controlling panning.
The PAN/AUX SEND 1-8 strip—just like its knob counterparts on the VS-2480—allows
you to quickly:
•
•
•
•
To "turn" a knob, click and drag up or down to raise or lower, respectively, its setting.
The strip can perform one of the above tasks at a time. To configure the strip for:
•
•
32 www.RolandUS.com
Project name
CH paddle
The white strip above the knobs always shows the parameter they're currently controlling.
Adjust the PAN parameter for the currently selected group of channels—see
Owner's Manual Page 139.
Adjust dynamics processing and EQ settings for the currently selected channel—
see Owner's Manual Page 139.
Adjust the send levels from the currently selected group of channels to any Aux
bus—see Owner's Manual Page 140.
Adjust any other channel parameter of your choice—see Owner's Manual Page 140.
panning—click the FADER paddle (see above) so the pan knobs are displayed, as
shown in the illustration above. When odd/even channels are linked, they appear
as silver knobs. Turning either knob turns both—the black part of each knob
graphically indicates the amount by which the channels' original pan settings have
been shifted leftward or rightward.
In this illustration, linked Tracks 5/6 haven't been shifted and Tracks 7/8 have been.
dynamics and EQ—click the CH paddle (see above) so the dynamics and EQ knobs
appear.
Roland VS-2480 Owner's Manual, Version Two Addendum
Project recording mode
Project sample rate
Name of parameter being controlled
99, 96