To Load Data From Disks (Drive Select) - Roland VS-1680 Owner's Manual

Chapter 6 Use with a Zip Drive

To Load Data from Disks (Drive Select)

If you want to take playable songs that have
been copied to Zip disks and load them onto
the VS-1680's hard disk, first switch the cur-
rent drive to the Zip drive (Drive Select). Afterwards,
you can make playable copies onto the internal hard
disk from the Zip disk.
* Even if you remake a playable copy of a song from the Zip
disk to the internal hard disk without first deleting an
existing playable copy of the song from the hard disk (even
if you return it to the hard disk), the original song is not
overwritten. In this case, a new song is created with the
same song name as that of the original and is written to
the lowest available song number.
fig.06-09b(restore.eps)
Internal Hard Disk
Song 1
Song 2
Song 3
Song 4
Internal Hard Disk
Song 1
Song 2
Song 3
Song 4
Song 1
fig.06-09d(restore.eps)
116
Zip Disk
Song 1
Zip Disk
Song 1
Internal Hard Disk
Song 1
Song 2
Song 4
Internal Hard Disk
Song 1
Song 2
Song 1
Song 4
1. Confirm that power of both the Zip drive and the
VS-1680 is turned on.
2. Insert a disk into the Zip drive.
3. Press [PLAY (DISPLAY)].
4. Hold down [SHIFT] and press [F6 (UTILITY)].
The Utility menu icon appears in the display.
5. Press [F4 (DrSel)]. If "DrSel" does not appear in
[F4], first press [PAGE] until "DrSel" is displayed,
and then press [F4 (DrSel)].
A list of currently connected drives appears in the dis-
play.
6. Press [
], [ ], [
cursor. Select the drive to which you want to
change. By rotating the TIME/VALUE dial, you
can select the partition you want to switch to. For
now select Zip drive (SCSI5).
At this time, the function buttons work as shown
below.
[F3 (Info)]: Displays the drive information.
Executes drive select.
[F4 (Exec)]:
[F6 (EXIT)]: Exits the screen.
fig.06-06(info.eps)
Zip Disk
Song 1
Zip Disk
Song 1
], and [ ] to move the