Table of Contents
Advertisement
'Melody Intelligent' parameters
This function group can be selected using [MENU] but-
ton ‰ "Performance Edit" ‰ "Melody Intelligent".
The following parameters are available:
Switch
Select "On" if you want add a MELODY INTELL part.
This part is triggered by the chord recognition of the
NTA parts and plays automatic harmonies that are
added to the melody that you are playing using the
on UP1 part. You can choose from among 18 har-
mony types (see below).
Parameter
Setting
Switch
Off, On
NOTE
Do not forget to switch on the UP1 part (page 27).
Type
Allows you to select one of the 18 harmony types:
Parameter
Setting
Type
1:Duet, 2:Organ 3:Combo, 4:Strings,
5:Choir, 6:Block, 7:Big Band, 8:Country,
9:Traditional, 10:Brodway, 11:Gospel,
12:Romance, 13:Latin, 14:Country Guitar,
15:Country Ballad, 16:Waltz Organ,
17:Octave Type1, 18:Octave Type2
Intell Threshold
This value represents the lowest velocity value
(between "1" and "127") of the UP1 part that triggers
the "Melody Intelligent" part. If you don't need this
switching function, select "0".
Parameter
Setting
Intell Threshold
0~127
Level
Allows you to set the level of the Melody Intelligence
part to ensure that the harmonies blend in with the
rest.
Parameter
Setting
Level
0~127
Backing Module BK-7m
Save As Default
This function allows you to save the current "Perfor-
mance Edit" settings as default settings. These set-
tings are loaded each time you switch on the BK-7m.
1.
Rotate the [CURSOR÷VALUE] dial to select
"YES", then press the dial to define the cur-
rent settings as the default state.
The display shows a confirmation message.
If you don't want to define the current settings as
the default state, rotate the [CURSOR÷VALUE] dial to
select "NO", then press the dial. The BK-7m then
returns to the "Performance Edit" page.
r
'Performance Edit' parameters
61
Advertisement
Table of Contents
