Video Select Section; Video Effects Section - Roland VR-5 Owner's Manual

Video Select Section

fig.video-mixer-section.eps
Use these when you want to switch video sources ([1] through [3] and [PLAYER]) using buttons rather than the touch panel.

Video Effects Section

fig.video-effects-section.eps
1. AUDIO FOLLOW Button (p. 31)
Pressing this makes the button light up and links audio output/mute with video switching.
2. SUB VIDEO SELECT Buttons (p. 34, p. 36)
These choose the sub video when you are carrying out two-screen compositing using Picture-in-Picture (PinP) or split (SPLIT). The
pressed button lights up and the selected channel becomes the sub video. The location where the sub video is displayed varies
according to the mode.
• PinP
The sub video is displayed as an inset screen.
• SPLIT
The sub video is displayed at the right or at the bottom.
3. MODE Button (p. 34, p. 36)
• PinP
When the button is dark, the Picture-in-Picture mode is enabled, and an inset screen overlays on the background.
• SPLIT
When the button is illuminated, the split mode is enabled, and the screen is split and two-screen compositing is carried out. This is useful for
comparing two camera angles on single screen.
4. TRANSITION Buttons (p. 28)
These choose the transition effect. The effect selected here is applied when switching between video sources.
* When you select [CUT], no transition effect is applied. Selecting [MIX] or [WIPE] applies a transition effect.
1
2
3
4
Names of Things and What They Do
17