Chapter 5 : Specifications
All specifications apply to the DS1000B Series Oscilloscopes and a probe with the
Attenuation switch set to 10X unless noted otherwise. To meet these specifications,
two conditions must first be met:
z
The instrument must have been operating continuously for thirty minutes within
the specified operating temperature.
z
Must perform the Self Calibration operation, accessible through the Utility menu,
if the operating temperature changes by more than 5 .
z
All specifications are guaranteed unless noted "typical".
© 2008 RIGOL Technologies, Inc.
User's Guide for DS1000B Series
RIGOL
5-1