Rigol DS1102/4B User Manual page 98

RIGOL
Figure 2-85 Table 2-52 The Utility menu (Page 2/3)
Menu
Pass/Fail
Record
Print set
Figure 2-86 Table 2-53 The Utility menu (Page 3/3)
Menu
Self-Cal
System Info
Preference
Date/Time
Note:
Self-Cal: Oscilloscope will calibrate parameter of vertical system (CH1, CH2, CH3,
CH4 and Ext); horizontal system and trigger system .The oscilloscope can normally
work under different environments.
2-70
Settings
Setup Pass/Fail test.
Setup Waveform Recorder.
Setup printing.
Settings
Execute Self-calibration.
Show the following information:
Serial number, software version,
installed module.
Go to preference menu.
Set the real date and time for
system.
User's Guide for DS1000B series
Comments
Comments
© 2008 RIGOL Technologies, Inc.