Print Setting - Rigol DS1102/4B User Manual

RIGOL

Print Setting

DS1000B series oscilloscopes support external printers. Press Utility
enter to the following menu.
Normal mode
Press PrintMod button choose the print mode as Normal
following menu.
Figure 2-99 Table 2-64 The Print Set menu
Menu
PrintMod
Print
Inverted
Palette
PictBridge print mode
Press PrintMod button choose the print mode as PictBridge, and navigate into the
following menu.
Figure 2-100 Table 2-65 The print Set menu (Page 1/4)
Menu
PrintMod
print
Abort
Status
2-80
Settings
Normal Set the print mode as normal.
PictBridge Set the print mode as PictBridge.
Execute the print operation.
ON Invert the color for print.
OFF Print original color.
Gray scale
Set up the print color.
Color
Settings Comments
Normal Set the print mode as normal.
PictBridge Set the print mode as PictBridge.
Execute the print operation.
Abort the printing.
Inquire about the current status of
the printer.
User's Guide for DS1000B series
Print set to
and navigate into the
Comments
© 2008 RIGOL Technologies, Inc.