Table of Contents
Advertisement
Triggering on the Video Lines
1.
Press the MENU key in the Trigger control area to see the trigger menu.
2.
Press Mode to select Video.
3.
Press Source to select CH1 as trigger source.
4.
Press Polarity to select .
5.
Press Sync to select Line Num.
6.
Turn (
) knob to trigger on a specified line number.
7. Adjust the
trigger.
8. Turn the horizontal
screen.
© 2008 RIGOL Technologies, Inc.
to set trigger level at the video sync pulse to get a stable
knob to observe a complete waveform on the
Figure 3-8
Waveform display
User's Guide for DS1000B Series
RIGOL
3-11
Hide quick links:
Advertisement
Table of Contents
