Chapter 5 Specifications - Rigol VS5000 Series User Manual

RIGOL

Chapter 5 Specifications

All the specifications are the same with VS5000 Series Oscilloscopes and probe which
attenuation switch is set as 10X unless otherwise stated. To accord with these
specifications, following condition must be met in the first place:
The instrument must be worked continuously more than thirty minutes within the
specified operating temperature.
NOTE：
All the vertical value is under the condition which Probe attenuation is 1X.
All specifications are guaranteed except marked "typical".
Specifications
Acquisition
Sampling Modes
Sampling Rate
Averages
Inputs
Input Coupling
Input Impedance
Probe Attenuation Factors
Maximum Input Voltage
Time delay between channel
(typical)
© 2008 RIGOL Technologies, Inc.
Real-Time
400MSa/s（sigle channel） ，200MSa/s
200MSa/s（double channels） ，200MSa/s
N time acquisitions, all channels simultaneously, N is selectable
from 2, 4, 8, 16, 32, 64, 128 and 256
DC, AC，GND
1MΩ±2%, in parallel with 15pF±3pF
50Ω±2%
Input impedance of LA is 100KΩ
1X, 10X, 100X, 1000X
400V (DC+AC Peak, 1MΩ input impedance)
40V (DC+AC Peak, 50Ω input impedance)
500ps
User's Guide for VS5000 Series
[1]
[3]
Equ-time
[2]
25GSa/s
[1]
[4]
[4]
5-1