Track Mode - Rigol DS1102/4B User Manual

RIGOL

Track Mode

Figure 2-131 Table 2-89 Cursor descriptions
Menu
Mode
Cursor A
Cursor B
CurA
(Cursor A)
CurB
(Cursor B)
In cursor track mode, the cursors move together with the selected waveform.
To do Track mode Cursor Measurements, follow these steps:
1. Select the Track mode for cursor measurement by pressing soft button as:
Cursor Mode Track.
2. Select channel Source for Cursor A and Cursor B by pressing soft button as:
Cursor Cursor A or Cursor B CH1, CH2, CH3, CH4 or None.
3. Move the cursors to adjust the horizontal positions of the cursors: (Details in the
following Table )
Table 2-90 The Cursor usage
Cursor
Cursor A Turn the multifunctional knob (
Cursor B Turn the multifunctional knob (
2-102
Settings
Track Set Track mode in cursor measurement.
CH, CH2,
CH, CH4, Set Cursor A in conjunction with CH1,
MATH
CH2 or turn off Cursor A.
None
CH, CH2,
CH, CH4, Set Cursor B in conjunction with CH1,
MATH
CH2 or turn off Cursor B.
None
Turn the multifunctional Knob (
move cursor A Horizontally.
Turn the multifunctional knob (
move cursor B horizontally.
Operation
) to move cursor A horizontally.
) to move Cursor B horizontally.
User's Guide for DS1000B series
Comments
© 2008 RIGOL Technologies, Inc.
) to
) to