Mask Setting - Rigol DS1102/4B User Manual

Mask setting

Press Utility Pass/Fail Mask Setting to go to the following menu.
Figure 2-95 Table 2-60 The Mask setting menu (Page 1/2)
Menu
X Mask
Y Mask
Create
Mask
Location
When using the internal memory to save, the operation menu is shown below.
Figure 2-96 Table 2-61 The Mask setting menu (Page 2/2)
Menu
Save
Load
Imp./Exp.
© 2008 RIGOL Technologies, Inc.
Settings
Set horizontal
<x div> waveform (0.04div-4.00div).
Set vertical clearance to the waveform
<y div> (0.04div-4.00div).
Create a test mask according to the
above clearance.
Internal Set the memory location of the mask
External files.
Settings
Store created test mask into internal
memory see table 2-10 .
Recall mask setting file from internal
memory (see table 2-57).
Go to import/export menu (same as
REF import/export menu. see table
2-12).
User's Guide for DS1000B Series
Comments
clearance to the
Comments
RIGOL
2-77