To Set Up The Display System - Rigol DS1102/4B User Manual

RIGOL

To Set up the Display System

The menu button for the display system on the front panel is shown in the following
figure.
Press the Display button, the interface menu for settings shows as follows.
Figure 2-66 Table 2-38 The Display menu (Page 1/3)
Menu
Type
Clear
Persist
Intensity
2-56
Display setup button
Figure 2-65
The display setup button
Setting
Vectors Display waveforms as vectors.
Dots Display waveforms as dots.
Clear all existing waveforms from
screen.
Infinite The sample points remain displayed
until turn the persistence "OFF".
OFF Turn off the persistence function.
Set up waveform intensity.
< >
percentage
User's Guide for DS1000B series
Comments
© 2008 RIGOL Technologies, Inc.