To Use Run Control Buttons - Rigol DS1102/4B User Manual

To Use Run Control Buttons

The RUN control buttons include AUTO (auto setting) and Run/Stop.
Auto:
The AUTO features automatic adjustments to produce a stable display of the input
signal. Press AUTO button, the following menu appears.
Figure 2-134 Table 2-92 The Auto menu
Menu
Multi-Cycle
Single
Cycle
Rise Edge
Fall Edge
Undo
© 2008 RIGOL Technologies, Inc.
Settings
Press to display multi-cycle waveform
on the screen.
Press
waveform on the screen.
Press to display the waveform's rising
edge and measure its rise time
automatically.
Press to display falling edge of the
waveform and measure its fall time
automatically.
Press to cancel all the Auto Set
actions, the oscilloscope will recover
to its previous status.
User's Guide for DS1000B Series
Comments
to display single
RIGOL
cycle
2-105