Rigol DS1102/4B User Manual page 21

Vertical offset back to 0 shortcut key
Turn the
channel and press the
back to 0 as a shortcut key, this is especially helpful when the trace position is
far out of the screen and want it to get back to the screen center immediately.
2. Change the vertical setup and notice that each change affects the
status bar differently.
z
Change the vertical sensitivity with the
in the status bar at the bottom of the display.
z
When you Press CH1, CH2, CH3, CH4, MATH, REF, the operating menus,
symbols, waveforms and status information of corresponding channel and
settings will be displayed on the screen. The current selected channel will be
shut down when you press the key associated with the channel one more time.
Coarse/Fine Shortcut key
The Coarse/Fine vertical control can be set by simply pressing the vertical
knob.
© 2008 RIGOL Technologies, Inc.
knob to change the vertical display position of
knob to set the vertical display position
User's Guide for DS1000B Series
RIGOL
knob and notice the change
1-11