Rigol DS1102/4B User Manual page 67

Figure 2-44 Table 2-25 The Video Trigger menu (Page 2/2 when Sync is set as the
Menu
Line Num
Standard
Sweep
Set Up
Figure 2-45 Table 2-26 The Video Trigger menu (Page 2/2 When the Sync is set as
Menu
Standard
Sweep
Set Up
© 2008 RIGOL Technologies, Inc.
specified line)
Settings
Select the specified line number for sync.
< Line sync >
PAL/SECM
Select Video standard.
NTSC
Auto Force the oscilloscope to trigger in the
absence of trigger condition.
Normal Lets oscilloscope to trigger in the
suitable trigger condition.
Single Lets oscilloscope to trigger one time in
the suitable trigger condition, and then
stop.
To go to set up menu, see Table 2-36.
All lines, Odd field and Even field)
Settings
PAL/SECAM
Select Video standard.
NTSC
Force the oscilloscope to trigger in the
Auto
absence of trigger condition.
Lets oscilloscope to trigger in the
Normal
suitable trigger condition.
Lets oscilloscope to trigger one time in
Single
the suitable trigger condition, and then
stop.
To go to set up menu, see Table 2-36.
User's Guide for DS1000B Series
RIGOL
Comments
Comments
2-39