To Use Run Control Buttons - Rigol DS1074B User Manual

To Use Run Control Buttons

The RUN control buttons include Auto (auto setting), Run/Stop and Single.
Auto: The Auto features automatic adjustments to produce a stable display of the
input signal. Press Auto button, the following menu appears.
Figure 2-145 Table 2-90 The Auto menu
Menu
Multi-Cycle
Single Cycle
Rise Edge
Fall Edge
User's Guide for DS1000B Series
Settings
Undo
Comments
Press to display multi-cycle waveform
on the screen.
Press to display single cycle waveform
on the screen.
Press to display the waveform's rising
edge and measure its rise time
automatically.
Press to display falling edge of the
waveform and measure its fall time
automatically.
Press to cancel all the Auto Set actions,
the oscilloscope will recover to its
previous status.
RIGOL
2-107