Remote Control - Rigol DG900 Pro Series User Manual

19

Remote Control

The following ways of remote control are supported:
• User-defined Programming
Users can program and control the instrument by using the SCPI (Standard
Commands for Programmable Instruments) commands. For details about the
SCPI commands and programming, refer to
series.
• PC Software
Users usually need to use the PC software to send commands to control the
instrument remotely via the USB or LAN interface, the PC software can search for
instrument resources and enable command interaction.
• Web Control
This instrument supports Web Control. You can view the display of the real-time
interface of the instrument using Web Control. Through the Web Control
method, you can migrant the device control to the control terminals (e.g. PC,
Mobile, iPad, and other smart terminals) to realize remote control of the
instrument. Connect the instrument to the network, then input the IP address of
the instrument into the address bar of the browser of your computer. When
mDNS is enabled, you can also input "hostname.local" (
You have to log in before using the Web Control to modify network settings.
When you first log in to the Web Control, the user name is "admin" and
password is "rigol".
This instrument can be connected to the PC via the USB and LAN interface to set up
communication and realize remote control through the PC.
CAUTION
Before connecting the communication cable, please turn off the instrument to avoid
causing damage to the communication interfaces.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Remote Control
Programming Guide of this product
LXI
) to use Web Control.
DG900 Pro User Guide
109