8 Mark the check box labeled Email alert on run complete if you want the system to send an
email alert to the user when it completes a protocol that was initiated by that user.
9 Mark the check box labeled Email alert on error occurs if you want the system to send an
email alert to the user when it encounters an error during a protocol run that was initiated by
that user.
NOT E
10 Press OK to save the user account.
The Add New User screen closes and you are returned to the User Management screen. The
new user name appears in the list on the User Management screen.
Edit user accounts
Only users with Advanced access are permitted to edit user accounts other than their own.
1 From the Home screen, press Settings.
The
2 Press User Management.
The
levels.
Figure 9
3 Select the user account to edit and press Edit.
The
Magnis and MagnisDx NGS Prep System User Guide
To enable email alerts, make sure to set up the outgoing mail server
information. See
page 33.
Settings screen
opens.
User Management screen
User Management screen
Edit User screen
opens.
"Set up the email settings for outgoing email alerts"
opens listing the available user names and corresponding user
on
25