Janome JR3000 Series Operation Manual page 95

After the source number is entered, the
destination number entry screen appears.
Enter a destination number for the copy.
Enter a number.
Destination Data Number 5
On the destination number entry screen, press
the F2 (NEW) key to display the
unregistered number list.
Press the F3 (LIST) key to display the
NEW LIST
registered number list. You can also select the
F0 F1 F2 F3 F4
program/data you want from this list.
If the destination number already contains data, a copy confirmation screen appears.
If you select [YES], the data is overwritten.
If you select [NO], the screen returns to the source number entry screen.
To change only the destination number, press the ESC key on the copy confirmation screen.
The screen will return to the previous screen (destination number entry screen).
Teaching Pendant Operation 94 Desktop Robot JR3000