Janome JR3000 Series Operation Manual page 26

0 – 9 ································· Overwrites the number under the cursor with the number you
. ··········································· Enters a decimal point. This key is invalid if the number already
± ·········································· Reverses the plus and minus signs. This key is invalid if a
SHIFT + DEL / CLR ············· Clears the entire value. The value becomes 0.
DEL / CLR ······························· Deletes the number or decimal point at the cursor's current
ENTR ···································· Sets the numerical value and returns the screen to the previous
ESC ······································ Returns to the previous menu or the base screen without setting a
SHIFT + ESC ····················· Returns to the base screen without setting a numerical value.
F4 (EXP) ······························· Switches to the character entry screen. Use this key to enter
Teaching Pendant Operation
press. If the cursor is hidden, the digits move one place to the left
and the number pressed is entered as the last digit.
contains a decimal point or no decimal fraction is possible.
negative (-) number is not possible.
location. The cursor and the number on the left side of the cursor
move one place to the right. However, the decimal point cannot be
deleted if the number exceeds the entry range without the decimal
point.
If the cursor is hidden, the bottommost figure is deleted and the
figures move one place to the right.
menu or base screen. If you enter a new point, the entry or
selection screen for the point data's next settable item appears. If
there is no item to be set next, a new position entry screen for the
next point appears.
numerical value.
This key is invalid on the program number entry screen if no
programs are registered.
These keys are invalid on the program number entry screen if no
program is registered.
variables, functions, and expressions. This key is valid when the
EXP label is displayed at the bottom right hand side of the screen
(above the F4 key).
25 Desktop Robot JR3000