Janome JR3000 Series Operation Manual page 29

CURSOR ···························· Moves the cursor upward (in the character string).
CURSOR ···························· Moves the cursor downward (in the character string).
CURSOR ···························· Moves the cursor to the left (in the character string).
CURSOR ···························· Moves the cursor to the right (in the character string).
SHIFT + CURSOR
SHIFT + CURSOR
SHIFT + CURSOR
SHIFT + CURSOR
DEL / CLR ······························ Deletes the character at the cursor's current location.
SHIFT + DEL / CLR ············· Clears the entire character string.
F2 (BFunc) ···························· Displays a list of built-in functions (functions built into the robot in
F3 (BVar) ······························· Displays a list of built-in variables (variables built into the robot in
If you enter character strings for a point job command such as outCOM, etc., you can designate the
characters using hexadecimal codes after the "\" code. If you want to use the "\" as a symbol, enter "\\".
In this case, the quotation marks ("") which enclose a character string are entered automatically.
Example: outCOM port2,"\0D\0A"
outCOM port2,"\\300"
Teaching Pendant Operation
··········· Moves the cursor to the top line.
··········· Moves the cursor to the bottom line.
··········· Moves the cursor to the top of the character string.
··········· Moves the cursor to the end of the character string.
If the cursor is at the far right of the character string, the last
character is deleted.
advance as operating functions). This key is valid when the sign
"BFunc" is displayed on the last line of the screen (above the
F2 key).
advance as operating functions). This key is valid when the sign
"BVar" is displayed on the last line of the screen (above the
F3 key).
Outputs CR LF codes.
Outputs \300.
28 Desktop Robot JR3000